How to program altera de2

To display our current level and target level in more easier way, we will use 7-Segment Display to show our current floor and our target level. The project file on Quartus is attached as a zip file, and the report is also attached. The report has instructions. Now, if you are on Windows 7 or later version, the drivers should automatically download for this Board when you plug in both USBs.

If you have not already installed Quartus 2 to program in Verilog, then you should do so now. You should be able to use Quartus 2 Version The project code is in the zip file attached. On Verilog you will need inputs as switches and 7-Segment Display as an output to display your target level, the floor you want to go to. Also we used registers to use our green LED to show the progress of the elevator.

So the green LEDs are also another output. For this part consider a circuit in which the output m has to be selected from five inputs u, v, w, x, and y. Part a of Figure 2. The circuit uses a 3-bit select input s2s1s0 and implements the truth table shown in Figure 4b.

A circuit symbol for this multiplexer is given in part c of the figure. Recall from Figure 2. It contains three instances of the circuit in Figure 4a. The VHDL code for this circuit is given in appendix 2.

The Nios-core shall run a program that implements a FIR-filter with the coefficients. Can you help me? I want to look at designs for FIR filters to learn how to implement one. And at that point, you'll probably see how to implement one. It boils down to multiply-accumulate operations, and manipulating a couple pointers.

It won't take much since you already have your coefficients.